The MPC X is the newest addition to the MPC hardware and software controller family! Featuring both complete standalone operation and full control over the brand new MPC 2.0 software, this machine is the best of both worlds. This guide will discuss some of the popular questions about the MPC X and MPC 2.0 features and functionality
This guide will be updated periodically to reflect new information and popular questions as they appear, so be sure to check back for updates!
For all questions regarding the latest MPC 2.0 Beta, visit our MPC 2.0 Beta FAQ here.
The MPC X has its own embedded system which sports a 1.8GHz quad-core processor and 2GB of RAM.
For internal storage, the MPC X has 16GB on board. There are 10GB of studio quality sounds pre-loaded and another 6GB for you to work with. You can use the 2 onboard USB ports to add more samples or to provide extra storage. There is also a compartment on the bottom of the MPC X which houses an SATA port for installing an optional HDD or SDD.
In standalone, the MPC Live will operate at 44.1 kHz, 24-bit, for both input and output. When using as a controller/interface with the MPC 2.0 Software, the MPC Live can operate at either 44.1, 48, or 96 kHz, selectable from the MPC preferences.
The MPC X, MPC Live and MPC 2.0 software will all be supported for use on Windows 8.1 and up, as well as Mac OS X 10.10 and up. This will only require the installation of a single driver to use the MPC X or MPC Live as a controller with MPC 2.0.
As a side note, the MPC X and MPC Live can be connected to virtually any operating system for simple file transfer. That means if you need to transfer files off of your Windows 7 computer, you can connect your MPC and your OS will be able to recognize any connected USB drives or SATA drives.
The MPC X features a 10" full color, multi-touch display (16:10 resolution) for navigating and controlling the internal software. This means that not only is it touch capable, but it can handle multi-touch gestures like pinching to zoom in/out and double-tap for advanced settings.
The MPC X has 16GB of internal storage. There are 10GB of studio quality sounds pre-loaded and another 6GB for you to work with. You can use the 2 onboard USB ports to add more samples or to provide extra storage. There is also a compartment on the bottom of the MPC X which houses an SATA port for installing an optional HDD or SDD.
MPC X includes the latest version of the MPC Software, version 2.0. You can use the MPC X entirely standalone or as a controller for MPC Software 2.0.
Yes! One of the great new features on the MPC X, MPC Live and MPC 2.0 software is the addition of audio track recording. In the standalone mode, the MPC will capable of up to 8 full audio tracks, but the MPC 2.0 software can record as many tracks as your system can handle.
The USB ports on the MPC X have a variety of uses. They can be used to transfer files on and off of the MPC X, as extra storage, and as input for USB MIDI controllers.
If you have a class compliant MIDI controller (one that does not require drivers), you will be able to plug it directly into an available USB port on the MPC X and control MIDI information in the embedded system software.
Yes! The MPC X and MPC Live will both ship with USB 3.0 cables and work at USB 3.0 speeds when connected to the computer as a controller. While USB 2.0 may work, we do recommend using 3.0 cables and ports whenever possible for the best results.
If the MPC is in standalone mode, any connected thumb drives or storage devices will operate at USB 2.0.
Yes! The MPC X and MPC Live both feature two (2) USB ports for connecting thumb drives and other USB storage devices, an SD card slot for standard SD/SDHC cards, as well as a port for adding an additional 2.5" SATA drive (either HDD or SSD). Virtually all drive sizes are supported, but we recommend formatting drives to exFAT, FAT32, or NTFS for the best results. SATA drives will be mounted to the compartment door with the included screws. Please make sure that the MPC X is turned off before connecting or disconnecting an SATA drive.
Yes! The MPC X and MPC Live will recognize MPC projects, programs and sequences made with earlier versions of the software and even older MPC hardware project and program formats. The MPC will convert them to the modern formats upon importing.
Yes, but not many. You may notice some differences depending on your work style, though the main difference will be with VST support. MPC 2.0 supports VST plugins when used on your computer, however, these will be disabled when using the projects on the MPC X and MPC Live in standalone.
Yes! Projects can be transferred and opened on any MPC live or MPC X considering all of the project's contents (samples, programs, sequences) are transferred as well. Considering there are differences in outputs and inputs on the MPC X versus MPC Live, you may notice that outputs or inputs are disabled if they are not available on the current controller.
The MPC X features 8 balanced TRS outputs and 4 combo inputs. Inputs 1 and 2 will support mic and line levels (+48v phantom power available) and inputs 3/4 will support phono (RCA) and line level (1/4" TRS) inputs. Important: The RCA inputs are intended only for phono-level audio. Please be sure not to connect line-level audio sources to this input.
There are also 2 instrument inputs (1/4" TS) on the front of the unit that can be assigned as inputs 1/2 with the Rear/Front switch below the channel gain knobs on the top.
On top of the audio i/o, the MPC X also has 2 full size, 5-pin MIDI inputs and 4 full-size 5-pin MIDI outputs, as well 8 CV/Gate outputs to sync with your modular synths and sequencers.
CV/Gate signals are similar to a standard MIDI connection in that they are responsible for transferring pitch and sequence timing data to other gear, usually modular synths or sequencers. Unlike MIDI, CV and Gate signals use simple voltages in varying ranges and lengths to control the other devices which open a lot of possibilities for implementation. For example, modular synths will often have a CV Pitch input (deciding the pitch of the synth at any given point), but they may also have filter input to control the filter instead. The gate would tell the synth when and how long to play a note, again just like the regions in a MIDI sequence.
For more info, check out the article here.
The MPC X uses the 0-5v range. All outputs can be used simultaneously.
All content will need to be stored on a thumb drive or the internal SATA drive before transferring to the internal storage on the MPC X or MPC Live. The Internal storage will not appear as an available drive when connected to your system.
There are no plans for official MPC X or MPC Live cases at the moment, but we’re glad to hear that there is interest! In the meantime, you may be able to find an alternative third-party case/bag that meets the size requirements:
The sample will be recorded into your MPC 2.0 sample pool and saved to the hard drive once the project is saved. While connected in controller mode, the MPC X will act only as a controller/interface, similar to the MPC Renaissance. But once disconnected from controller mode, your project can be transferred to a USB drive, SD card or additional drive on the MPC X to open in standalone.
Absolutely! The MPC X will be fully compatible with projects, programs and sequences from previous MPC versions and legacy hardware MPC's such as the MPC5000, MPC4000, MPC3000, MPC2500/2500XL, MPC1000, and MPC500.
The MPC X will support the following file types: .AKP, .ALL, .IPT, .PGM, .PRJ, .SND, .MID, .SEQ, .APS, .50k, and .50s.
Yes! Here is a quick run-down:
If you do not fall into one of these two categories, don't worry! The software will still be available to purchase at an upgrade price for existing MPC users that are outside of the grace period:
All MPC Touch, MPC Live, and MPC X users can find a download link and authorization code for MPC 2.0 in their Akai Pro account once they have registered their product. For a complete walkthrough on downloading, installing and activating the MPC 2.0 Software, see our video and guide below:
The MPC 2.0 license can be authorized on two separate computers/iLok dongles simultaneously, so you can have two active versions at the same time. If another computer or iLok dongle needs to be authorized, the license can be deactivated and re-authorized to a different location using the iLok License Manager. This means that you are fully in control of your software authorizations!
Check out our article here for a full walkthrough on activating and deactivating iLok licenses.
Absolutely! Make sure your iLok is connected to the computer while authorizing the software and you will be able to choose it as a location to store the license during the authorization process.
Windows: Windows 8.1 and Windows 10.1 (64-bit)
Mac: Mac OS X 10.10 - 10.12 (Yosemite - Sierra)
Yes, MPC 2.0 will support the older MPC series including the Renaissance, Studio, Studio Black, Element, and Touch, as well as the new MPC X and MPC Live.
Yes! one of the big new features with MPC 2.0 is the addition of full audio track recording! Audio tracks will play back over the course of an entire song while any sequences loop behind it, similar to recording in arrangement mode in Ableton.
MPC 2.0 and standalone MPC X and Live will have a total track limit of 128. Keep in mind, this is still subject to each system's limitations and CPU constraints.
Yes! MPC 2.0 will come with VST, AU and AAX versions to run as a plug-in in your favorite DAW, exactly like the older MPC software versions.
Of course! MPC 2.0 will support VST2 plugins, as well as AU plugins for Mac, just like the previous MPC software versions.
Absolutely! MPC 2.0 will be fully compatible with projects, programs and sequences from previous MPC versions and even legacy hardware MPC's like the MPC5000 and MPC2500. MPC 2.0 will support the following file types: .AKP, .ALL, .IPT, .PGM, .PRJ, .SND, .MID, .SEQ, .APS, .50k, and .50s.
Got more questions? We're happy to help!
Whether you are a customer or dealer, if you already own an Akai Professional product, or if you just have pre-sales questions, the Akai Professional technical support team is available to help! Visit the link below to connect with any of the following support options: phone support, email support.